EMC, NetApp roll out Fibre Channel over Ethernet products

Fibre Channel over Ethernet dominates storage show

EMC and NetApp pushed new Fibre Channel over Ethernet products at Storage Networking World in the US last week, but the technology may not gain mainstream adoption for more than a year.

Companies will begin serious evaluations of FCoE in early 2009, and that process will probably take a full year, says storage analyst Arun Taneja of the Taneja Group. The analyst predicted that deployment of FCoE in production networks won't happen in any great numbers until 2010.

Last week's FCoE announcements primarily show that Fibre Channel vendors are making defensive moves against iSCSI competitors like Dell EqualLogic, Taneja said. He explained that Convergence Enhanced Ethernet technology will let Ethernet be equivalent to Fibre Channel transport in that it will not drop packets.

iSCSI, which is typically cheaper than Fibre Channel, will thus ride on top of lossless Ethernet, posing a big problem to Fibre Channel vendors. FCoE was devised to let the Fibre Channel storage protocol take advantage of 10 Gigabit Ethernet networks.

"It's a very strong defensive move on the part of the Fibre Channel community," Taneja says. "If it all goes to iSCSI there is going to be trouble."

Taneja said iSCSI over 10 Gigabit Ethernet will likely progress along the same timeline, with customer evaluation in 2009 and production in 2010. If iSCSI became the dominant protocol, Emulex in particular would feel financial pain because it relies so heavily on revenue from Fibre Channel host bus adapters, he said.

This week, EMC introduced its first FCoE switch at the conference. The EMC Connectrix NEX-5020 switch is generally available, as are converged network adapters from Emulex and QLogic that work in tandem with the switch, EMC says.

"Based on the Cisco Nexus 5000 Series Switches for data centers, the Connectrix NEX-5020 provides line-rate, low-latency, lossless 10Gbps Ethernet switching for network connectivity," EMC states. "It is designed to meet the ever-increasing I/O demands of multicore processors, VMware Infrastructure and other virtualized server and SAN environments.

Join the newsletter!

Error: Please check your email address.

Tags emcnetappFibre Channel over Ethernet

Show Comments
[]