4 lessons from the Springfield, Ill. SCADA cyberattack
- 23 November, 2011 07:40
The recent cyberattack on a public water utility in Springfield, Ill. has stoked considerable concerns about the vulnerability of U.S. critical infrastructure equipment.
The attack destroyed a pump at the facility when someone using a computer with an IP address based in Russia gained access to the Supervisory Control and Data Acquisition (SCADA) system controlling the pump.
Experts in the industrial control systems arena say that, while that attack was relatively inconsequential and not unsurprising given the vulnerabilities that exist, it may be a harbinger of things to come.
Here are four lessons from the incident, which is still under investigation:
Information sharing is critical
Though an initial report by the Illinois Statewide Terrorism and Intelligence Center called the incident a public water district cyber intrusion, the Department of Homeland Security (DHS) and other agencies that share information on such incidents have so far been relatively quiet about what happened. That led to speculation about the nature of the attack, how serious it was, and what the motives might have been. Some even question whether the pump could have failed in the manner reported in the incident report.
The water pump at the Springfield utility is supposed to have burned out after attackers used their access to the SCADA system to cycle the pump off and on continuously. Typically that should not have happened, said L.W. Brittian, a SCADA system consultant and training expert. "Rapid cycling of a large pump motor should not, by itself, have been enough to burn a pump motor up," Brittian said. While turning a pump motor on and off over and over can cause it to overheat. temperature and pressure control mechanisms built into it should have tripped, taking it safely offline.
"The SCADA system may have been accessible on the Internet, so someone could come in and get the pump to run and they could ask it to stop," Brittian said. "They could tell it to start and stop every three seconds until something happens," he said. But what they would not have been able to access over the Internet is the overload relay that is provided to protect the motor from overloading and burning up.
Even if hackers had accessed the operating controls, it's doubtful they could have also accessed the safety controls, he said. "We need more details of exactly what happened."
SCADA systems are easy to hack
A vast majority of the systems used to control critical equipment at places like power stations, nuclear power plants and water treatment facilities are inherently insecure. In many cases, anyone with logical access to an industrial control system or programmable logic controller can upload firmware on it without authentication. Passwords are often hardcoded into systems. And many systems have administrative backdoors and contain very basic buffer overflow errors.
Such vulnerabilities were acceptable for a long time because SCADA systems were not really connected to the outside world; An attacker usually needed physical access to a SCADA system to compromise it.
That's changed over the last few years. A growing number of SCADA systems are connected to the Internet, making them much more vulnerable to attack from external sources. Last week, a hacker named pr0f claimed he hacked into a SCADA system at a water utility in South Houston by overcoming a three-character password that was used to protect the system.
"The major thing about control system security that most people don't get is that there is none," said Ralph Langner, a German industrial control systems expert noted for his research on the Stuxnet worm last year. Stuxnet has been blamed for disrupting Iran's uranium enrichment efforts by causing SCADA problems. More recently, Iran said it had been affected by the Duqu trojan, which also targets SCADA systems.
Duqu is seen as a precursor to the next Stuxnet.
More people will attempt to break into SCADA systems
Expect to see many more such attacks. After Stuxnet, the SCADA community has been living in a fishbowl of sorts, said Eric Byres CTO and founder of Byres Security, a provider of industrial control system security products and consulting services. People who didn't know how to spell SCADA are now finding all sorts of vulnerabilities in SCADA products. So far this year, there have been over 200 vulnerabilities discovered in ICS products from various vendors, compared to just over 10 that were discovered in all of 2010.
The SCADA community is "no longer living in a little bubble," Byres said. "Security by obscurity no longer works."
Fixing SCADA systems is hard
After Stuxnet, there has been a greater effort to find and fix vulnerabilities in SCADA systems. But most of the focus has been on addressing issues in the front-end -- mostly Windows-based Human Machine Interface (HMI) systems that are used to interact with SCADA systems. But vendors are paying far less attention to vulnerabilities in the embedded control systems themselves. The ISA Security Compliance Institute last year launched a program to test and certify industrial control system products for vulnerabilities. So far just two companies have had their products certified under the program.
Utilities also often lack the resources needed to bolster the security of their control systems. This is especially true in the case of smaller utilities such as the one that was attacked last week in Springfield. "Smaller utilities have a harder time securing their SCADA and DCS [Distributed Control System] because they don't have the IT staff or other resources to allocate to this," said Dale Peterson, CEO of Digital Bond, a consultancy that specializes in control system security.
"We have seen municipal utilities that have two people on the IT staff that are responsible for keeping everything running," from desktops and email systems to SCADA and distributed control systems, he said.
Jaikumar Vijayan covers data security and privacy issues, financial services security and e-voting for Computerworld. Follow Jaikumar on Twitter at @jaivijayan or subscribe to Jaikumar's RSS feed. His e-mail address is firstname.lastname@example.org.